CN 
EN
A list,
MGU-08C deviation correction detector is a photoelectric detection of deviation correction material deviation material output electrical signal detector, the detector has the characteristics of simple adjustment sensitivity, can be widely used in the side of the deviation correction control system. The detector has one way analog output can be adapted to analog correction, and in addition, there are two way switch output can be set accuracy can be adapted to the switch error correction controller, with easy to use and simple operation.
Second,
Description of dimensions and pin position of plug
III. Technical parameters
model | MGU-08C |
Pipe diameter | 16MM |
Effective detection range | ±4MM |
Working voltage | DC 10-15V/50MA |
Analog output | DC 2-6.5V(not affected by panel Settings) |
Switching output | Two-way open collector output (0C/NPN) |
Sensitivity setting | Sensitivity automatic calibration/switching output can set correction accuracy |
Four, the setting method
4-1 sensitivity Settings: the sensitivity of the detector automatic calibration method is used, the user need only when detector not rectifying materials cover probe press set key, the side of the indicator light flashing hint 2 seconds, and then put the rectifying materials covering the probe after press the set key again, this time the other side, the indicator light flashing hint 2 seconds, set up automatically.
4-2 Detection accuracy setting for switching quantity output: the detection range corresponding to the digital quantity output lock of the detector can be set. Users can choose the appropriate setting according to the correction accuracy and the prevention of correction oscillation phenomenon. At this time, the indicator light is centered on the middle red light. The lights on both sides are the output range. After the selection is completed, press the button for more than 5 seconds until all the lights are flashing and release the button to exit the setting